HARDWARE FEATURES |
|
Standards and Protocols | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3az, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.1x |
Interface            | • 24× 10/100/1000 Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) • 4× Gigabit SFP Slots    |
Network Media | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • 100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m) • 1000BASE-X: MMF, SMF           |
Fan Quantity     | 2 |
Power Supply   | 100-240V AC, 50/60Hz |
PoE Ports (RJ45)              | • Standard: 802.3at/af compliant • PoE+ Ports: 24 Ports   • PoE Power Budget: 250 W*     |
Dimensions ( W x D x H )             | 17.3 × 8.7 × 1.73 in (440 × 220 × 44 mm) |
Mounting           | Rack Mountable |
Max Power Consumption           | • V1: 308.6 W (110V/60Hz with 250 W PD connected); 32.1 W (110 V/ 60 Hz with no PD connected) • V2: 294.7 W (220 V/50 Hz) (with 250 W PD connected) • V3: 291.9 W (110V/60Hz) (with 250 W PD connected) • V4: 306.9 W (110V/60Hz) (with 250 W PD connected) |
Max Heat Dissipation   | • V1: 1052.94 BTU/h (with 250 W PD connected); 109.53 BTU/h (with no PD connected) • V2: 1005.66 BTU/hr (220V/50 Hz) (with 250 W PD connected) • V3: 996.01 BTU/hr (110V/60Hz) (with 250 W PD connected)     • V4: 1047.30 BTU/hr (110V/60 Hz) (with 250 W PD connected) |
PERFORMANCE |
|
Switching Capacity         | 56 Gbps |
Packet Forwarding Rate | 41.7 Mpps |
MAC Address Table        | • V1, V2, V4 and above: 8K • V3: 16K            |
Packet Buffer Memory | 4.1 Mbit |
Jumbo Frame   | 9 KB |
SOFTWARE FEATURES |
|
Quality of Service           | • 802.1p CoS/DSCP priority • 8 priority queues         • Priority Schedule Mode             - SP (Strict Priority)         - WRR (Weighted Round Robin) • Queue Weight Config • Bandwidth Control      - Port/Flow based Rating Limit   • Smoother Performance             • Storm Control - Multiple Control Modes(kbps/ratio) - Broadcast/Multicast/Unknown-Unicast Control |
L2 and L2+ Features      | • 16 IP Interfaces - Support IPv4/IPv6 Interface     • Static Routing - 32 IPv4/IPv6 Static Routes        • DHCP Server  • DHCP Relay    - DHCP Interface Relay   - DHCP VLAN Relay         • DHCP L2 Relay               • Static ARP       • Proxy ARP       • Gratuitous ARP             • Link Aggregation          - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports   per group           • Spanning Tree Protocol             - 802.1D STP     - 802.1w RSTP  - 802.1s MSTP  - STP Security: TC Protect, BPDU Filter/Protect,   Root Protect      • Loopback Detection    • Flow Control  - 802.3x Flow Control    • Mirroring        - Port Mirroring - CPU Mirroring - One-to-One    - Many-to-One - Flow-Based     - Ingress/Egress/Both    • Device Link Detect Protocol (DLDP) • 802.1ab LLDP/ LLDP-MED         |
Advanced Features        | • Automatic Device Discovery • Batch Configuration   • Batch Firmware Upgrading      • Intelligent Network Monitoring • Abnormal Event Warnings        • Unified Configuration • Reboot Schedule          |
VLAN    | • VLAN Group - Max. 4K VLAN Groups • 802.1Q tag VLAN         • MAC VLAN: 12 Entries • Protocol VLAN              • GVRP • Voice VLAN    |
Access Control List         | • Support up to 230 entries • Time-Range    - Time Slice         - Week Time-Range        - Absolute Time-Range  - Holiday             • Time-based ACL            • MAC ACL         - Source MAC    - Destination MAC           - VLAN ID            - User Priority   - Ether Type       • IP ACL - Source IP          - Destination IP - IP Protocol       - TCP Flag            - TCP/UDP Source Port   - TCP/UDP Destination Port         - DSCP/IP TOS   • IPv6 ACL          • Combined ACL              • Rule Operation             - Permit/Deny   • Policy Action  - Mirror - Rate Limit         - Redirect            - QoS Remark    • ACL Rules Binding        - Port Binding    - VLAN Binding • Actions for flows          - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit         - QoS Remark    |
Security              | • AAA • 802.1X             - Port based authentication         - MAC (Host) based authentication          - Authentication Method includes PAP/EAP-MD5 - MAB  - Guest VLAN    - Support Radius authentication and       accountability   • IP/IPv6-MAC Binding  - 512 Binding Entries      - DHCP Snooping             - DHCPv6 Snooping        - ARP Inspection              - ND Detection  • IP Source Guard            - 253 Entries      - Source IP+Source MAC • IPv6 Source Guard       - 183 Entries      - Source IPv6 Address+Source MAC • DoS Defend    • Static/Dynamic/Permanent Port Security           - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control     - kbps/ratio control mode            • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2   • Secure Command Line Interface (CLI)  management with SSHv1/SSHv2 • IP/Port/MAC based access control |
IPv6      | • IPv6 Static Routing and ACL • IPv6 Dual IPv4/IPv6    • IPv6 Interface • Multicast Listener Discovery (MLD) Snooping  • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery        • Internet Control Message Protocol (ICMP)        version 6             • TCPv6/UDPv6 • IPv6 applications          - DHCPv6 Client - Ping6 - Tracert6            - Telnet(v6)        - IPv6 SNMP      - IPv6 SSH           - IPv6 SSL            - Http/Https      - IPv6 TFTP         |
MIBs     | • MIB II (RFC1213) • Bridge MIB (RFC1493) • P/Q-Bridge MIB (RFC2674)      • Radius Accounting Client MIB (RFC2620)           • Radius Authentication Client MIB (RFC2618)   • Remote Ping, Traceroute MIB (RFC2925)           • Support TP-Link private MIBs  • RMON MIB(RFC1757, rmon 1,2,3,9) |
MANAGEMENT |
|
Omada App       | Yes, through • Omada Cloud-Based Controller (Not Supported by TL-SG2428P v2)       • OC300             • OC200             • Omada Software Controller     |
Centralized Management           | • Omada Cloud-Based Controller (Not Supported by TL-SG2428P v2) • Omada Hardware Controller OC300 • Omada Hardware Controller OC200 • Omada Software Controller     |
Cloud Access     | Yes, through • Omada Cloud-Based Controller (Not Supported by TL-SG2428P v2)       • OC300             • OC200             • Omada Software Controller     |
Zero-Touch Provisioning              | Yes. Requiring the use of Omada Cloud-Based Controller (Supported by TL-SG2428P v1, v3 and above, while is not supported by TL-SG2428P v2) |
Management Features | • Web-based GUI • Command Line Interface (CLI) through telnet   • SNMPv1/v2c/v3          • SNMP Trap/Inform      • RMON (1,2,3,9 groups)             • SDM Template               • DHCP/BOOTP Client    • Dual Image, Dual Configuration • CPU Monitoring           • Cable Diagnostics         • EEE    • SNTP • System Log     |
OTHERS |
|
Certification      | CE, FCC, RoHS |
Package Contents           | TL-SG2428P • Power Cord    • Installation Guide         • Rackmount Kit              • Rubber Feet   |
System Requirements  | Microsoft® Windows® XP, Vista™ or Windows 7/8/10/11, MAC® OS, NetWare®, UNIX® or Linux. |
Environment    | • Operating Temperature: 0–50 ℃ (32–122 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉) • Operating Humidity: 10–90% RH non-condensing         • Storage Humidity: 5–90% RH non-condensing |
Notes | *PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors. **Zero-Touch Provisioning requires the use of Omada Cloud-Based Controller. Note that TL-SG2428P v2 doesn't support Omada Cloud-Based Controller. Please go to Omada Cloud-Based Controller Product List to find all the models supported by Omada Cloud-Based Controller. |
