Teltonika RUT240 Instant LTE Failover Industrial 4G LTE Router

Mobile module

4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8   kbps

Status  

Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes   sent/received, connected band, IMSI, ICCID

SMS      

SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL   to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

Black/White list

Operator black/white list

Band management        

Band lock, Used band status display

APN      

Auto APN

Bridge  

Direct connection (bridge) between mobile ISP and device on LAN

Passthrough      

Router assigns its mobile WAN IP address to another device on LAN

Multiple   PDN (optional)

Possibility to use different PDNs for multiple network access and services (not available in standard FW)

WIRELESS

Wireless mode 

IEEE 802.11b/g/n, Access Point (AP), Station (STA)

WiFi security     

WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP,   TKIP, Auto Cipher modes, client separation

SSID      

SSID stealth mode and access control based on MAC address

WiFi users          

Up to 50 simultaneous connections

Wireless Hotspot             

Captive portal (Hotspot), internal/external Radius server, built in   customizable landing page

ETHERNET

WAN    

1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with   IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

LAN       

1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u   standards, supports auto MDI/MDIX

NETWORK

Routing

Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng,   OSPF6)

Network protocols         

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3,   TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake   On Lan (WOL)

VoIP passthrough support           

H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring 

Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link   inspection

Firewall

Port forward, traffic rules, custom rules

DHCP    

Static and dynamic IP allocation, DHCP Relay, Relayd

QoS / Smart Queue Management (SQM)       

Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS   

Supported >25 service providers, others can be configured manually

Network backup              

VRRP, Mobile, Wired and WiFi WAN options, each of which can be used   as backup, using automatic Failover

Load balancing 

Balance your internet traffic over multiple WAN connections

SSHFS (optional)              

Possibility to mount remote file system via SSH protocol (not available in standard FW)

SECURITY

Authentication 

Pre-shared key, digital certificates, X.509 certificates

Firewall

Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack   prevention          

DDOS prevention (SYN flood protection, SSH attack prevention,   HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas,   NULL flags, FIN scan attacks)

VLAN    

Port and tag based VLAN separation

Mobile quota control     

Set up custom data limits for the SIM card

WEB filter           

Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only

Access control  

Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN           

Multiple clients and server can be running simultaneously, 12   encryption methods

OpenVPN Encryption    

DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC,   RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

IPsec    

IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)

GRE       

GRE tunnel

PPTP, L2TP         

Client/Server services can run simultaneously

Stunnel

Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code

SSTP     

SSTP client instance support

ZeroTier              

ZeroTier VPN

WireGuard         

WireGuard VPN client and server support

MODBUS TCP SLAVE

ID filtering          

Respond to one ID in range [1;255] or any

Allow Remote Access    

Allow access through WAN

Custom registers             

MODBUS TCP custom register block requests, which read/write to a file   inside the router, and can be used to extend MODBUS TCP Slave functionality

MODBUS TCP MASTER

Supported functions      

01, 02, 03, 04, 05, 06, 15, 16

Supported   data formats

8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MODBUS DATA TO SERVER

Protocol              

HTTP(S), MQTT, Azure MQTT

MQTT GATEWAY

MQTT gateway

Allows sending commands and receiving data from MODBUS Master through   MQTT broker

MONITORING & MANAGEMENT

WEB UI

HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot,   event log, system log, kernel log

FOTA    

Firmware update from sever, automatic notification

SSH       

SSH (v1, v2)

SMS      

SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call        

Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off

TR-069 

OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS,   LibCWMP, Friendly tech, AVSystem

MQTT   

MQTT Broker, MQTT publisher

SNMP  

SNMP (v1, v2, v3), SNMP trap

JSON-RPC           

Management API over HTTP/HTTPS

MODBUS            

MODBUS TCP status/control

RMS      

Teltonika Remote Management System (RMS)

IOT PLATFORMS

Cloud of Things

Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx         

Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile   Signal Strength, Mobile Network Type

Cumulocity        

Allows monitoring of: Device Model, Revision and Serial Number,   Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN   Type and IP

Azure IoT   Hub   

Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection   type, Temperature, PIN count to Azure IoT Hub server

SYSTEM CHARACTERISTICS

CPU      

Atheros Hornet, MIPS 24Kc, 400 MHz

RAM     

64 MB, DDR2

FLASH storage  

16 MB, SPI Flash

FIRMWARE / CONFIGURATION

WEB UI

Update FW from file, check FW on server, configuration profiles,   configuration backup, restore point

FOTA    

Update FW/configuration from server

RMS      

Update FW/configuration for multiple devices

Keep settings    

Update FW without losing current configuration

FIRMWARE CUSTOMIZATION

Operating system           

RutOS (OpenWrt based Linux OS)

Supported languages    

Busybox shell, Lua, C, C++

Development tools        

SDK package with built environment provided

INPUT/OUTPUT

Input    

1 x Digital input, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high

Output

1 x Digital open collector output, max output 30 V, 300 mA

Events 

SMS, EMAIL, RMS

POWER

Connector          

4 pin industrial DC power socket

Input voltage range        

9 – 30 VDC, reverse polarity protection, surge protection >33 VDC 10us max

PoE (passive)    

Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port, not compatible   with IEEE802.3af, 802.3at and 802.3bt

Power consumption      

< 6.5 W Max

PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)

Ethernet             

2 x RJ45 ports, 10/100 Mbps

I/O’s     

1 x Digital Input, 1 x Digital Output on 4 pin power connector

Status LEDs        

3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED

SIM       

1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder

Power  

1 x 4 pin DC connector

Antennas           

2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors

Reset   

Reboot/Factory reset button

PHYSICAL SPECIFICATION

Casing material

Aluminium housing with DIN rail mounting option, plastic panels

Dimensions (W x H x D)

83 x 25 x 74 mm

Weight

125 g

Mounting options           

Bottom and sideways DIN rail mounting slots

OPERATING ENVIRONMENT

Operating temperature

-40 °C to 75 °C

Operating humidity        

10% to 90% non-condensing

Ingress Protection Rating             

IP30

REGULATORY & TYPE APPROVALS

Regulatory         

Operator 

Verizon, AT&T

Vehicle

ECE R10 (E-mark)

EMI IMMUNITY

Standards           

Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301   489-52 V1.1.0

FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014)   

ESD       

EN61000-4-2:2009

RS          

EN 61000-4-3:2006 + A1:2008 + A2:2010

EFT        

EN 61000-4-4:2012

Surge immunity (AC Power Line)              

EN 61000-4-5:2006

Surge immunity (Ethernet ports)              

EN 61000-4-5:2014, clause 7.1 of ITU-T K21

CS          

EN 61000-4-6:2009

DIP        

EN 61000-4-11:2004

RF

Standards           

EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301   908-2 V11.1.1, EN 301 908-13 V11.1.1

FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part   22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017)

RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3   (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1

AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS   4268:2017              

SAFETY

Standards           

IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013

AS/NZS 60950.1:2015     

EN 50665:2017, EN 62311:2008 

FCC 47 CFR Part 1 1.1310              

RSS-102 Issue 5 (2015)